If you want to demolish a commercial building in Australia, it would cost you in the range of $15000 to $22000. However, this cost depends on several factors, and it would be a good idea to have a fair estimate of the demolition cost of your commercial building before you hire a demolition contractor.
Here are the factors that you need to consider:
The commercial building square footage
Since most of the costs associated with a commercial demolition in Sydney is charged by the square foot, you need to measure the square footage of the commercial building to be demolished. If the commercial building is rectangle or square-shaped, you can use a measuring tape or laser measuring tape to measure the area.
After you have measured the length and the breadth, you need to multiply them to arrive at the square foot area. The average cost per square foot for demolition is $3-$11. You need to remember that demolition companies in Sydney will charge you depending on the square footage, and this cost may vary depending on the area and complexity of demolition. Also, per square foot cost of demolition of a commercial building will go down as the area increases.
Presence of asbestos in the building
If your commercial building has asbestos, the demolition cost will increase. It is because the asbestos has to be removed and disposed of safely before the building is demolished. Whether you need industrial demolition in Sydney or house demolition in Sydney, if your building is pre-1980, it will likely have asbestos in it.
Asbestos can be found in cement, floor tiles, millboard, furnace insulation, and so forth. You need to hire a reputable asbestos inspector to inspect your commercial building before demolition. There are guidelines to remove asbestos, and these have to be adhered to. Asbestos removal cost is around $1.5 to $2 per square foot. But again, this will vary depending on the complexity involved.
Permits and policies
Before the demolition begins, you need to make sure that you have all the necessary permits, policies, and licenses in place. Demolition contractors in Sydney will not be able to start work unless you acquire a demolition permit. The demolition contractor will include this cost when giving you an estimate. The average permit cost in Australia is $350.
If you keep the above factors in mind, you will be able to set aside the required funds for demolishing your commercial building safely and efficiently.
